Rotating beacon LED 12+24 volts

Description

The OSRAM LIGHTsignal LED BEACON LIGHT is a 360 rotating, yellow LED rotating beacon that can be attached to vehicles with an unusual width, length or load, as well as to municipal vehicles, emergency, command and accident relief vehicles to indicate a to draw attention to unusual situations in road traffic or in the work environment. The rotating beacon from OSRAM can be used for better visual recognition, marking and securing of dangerous areas or special places. Rotating beacons are also used in certain facilities, on machines and devices and in alarm systems. The LED rotating beacon from OSRAM is characterized by a high degree of efficiency thanks to eight long-life, high-performance LEDs with up to 1900 Kelvin and 1200 lumens, and thus ensures improved visibility and thus increased safety for you and others - during the day and at night . Thanks to the non-slip, shock-absorbing rubber base, the LED warning light from OSRAM is particularly insensitive to vibration. At the same time, the fully rubberized base acts as a seal between the product and the substrate. In addition, the robust, shatterproof housing made of polycarbonate can also withstand heavier loads according to the IK 08 standard. To reduce and prevent dirt deposits on the beacon, the OSRAM LIGHTsignal LED has a smooth surface on the housing, thus preventing the signal effect from being impaired by dirt. The OSRAM LIGHTsignal LED BEACON LIGHT impresses with its high luminosity and at the same time with its low power consumption. Thanks to the low power consumption of the LEDs, the rotating warning light from OSRAM is also suitable for use over a longer period of time. Due to the compact and modern design, the beacon offers different application options and also a high degree of flexibility as it is compatible with both 12V and 24V vehicles. The mounting material included in the scope of delivery enables direct and precise attachment and thus immediate use of the beacons. With the three-point mounting system, the beacon can be securely and firmly attached to the vehicle roof. In addition, the LIGHTsignal LED warning light from OSRAM complies with the ECE R10 and R65 guidelines and is therefore permitted for use in road traffic. The OSRAM LIGHTsignal LED was tested in our DIN EN ISO/IEC 17025-certified environmental simulation laboratory for extreme external influences in terms of water, dust, heat, cold and impacts from falls and validated with IP protection class IP65 + IK08. The integrated heat management system regulates the temperature of the LED headlight and can thus prevent damage from overheating. The polarity protection inhibits the wrong polarity reversal in the power supply and can thus avert possible damage caused by the LEDs automatically switching off.