Description

Tests the voltage, starting power and performance of the alternator


The MXS 5.0 TEST + CHARGE is designed for batteries between 1.2 Ah and 110 Ah. The check function includes three easy-to-use programs for checking battery voltage, starting power and alternator power, providing a complete picture of the battery state of charge and the system health of the vehicle charging system. In addition, the MXS 5.0 TEST + CHARGE has a patented automatic desulphation program and the CTEK patented float/pulse system. This is the most efficient trickle charge mode when a battery is left connected to the charger for an extended period of time.

Technical data:

Battery types: lead acid, maintenance-free, AGM, GEL and calcium-calcium batteries

Battery capacity: Charges batteries with 1.2 to 110Ah, trickle charge 160Ah

Charging outputs: 1

Approvals: -

Dimensions: 168 x 65 x 38mm

Weight: 0.6kg

Display: none

Charging cycles: 8 levels

Protective devices: protected against dust and splash water, protected against sparks, reverse polarity - and short-circuit proof.

Recommended areas of application: Perfect for motorcycle, car, SUV, caravan, mobile home, tractor and ship batteries

Protection class: IP65

Test function: battery, alternator, starter

Scope of delivery: power cord and 2 different battery connection cables

Charging functions: & nbsp & nbsp & nbsp & nbsp & nbsp & nbsp & nbsp & nbsp
& nbsp & nbsp & nbsp. & Nbsp & nbsp & nbsp STEP 1 DESULPHATION
Detects sulfated batteries. The current and voltage pulsate, removing sulfate from the battery's lead plates, restoring battery capacity.

STEP 2 SOFT START
Checks the battery's ability to charge. This step prevents the charging process from continuing if the battery is defective.

STEP 3 BULK
Charge with maximum current until approx. 80% of the battery capacity is reached.

STEP 4 ABSORPTION
Charging with a weak current until reaching up to 100% of the battery capacity.

STEP 5 ANALYSIS
Test of the charge retention of the battery. Batteries that cannot hold their charge must be replaced.

STEP 6 RECOND
Select the Recond program to insert the reconditioning step into the loading process. During
the reconditioning step, the voltage is increased in order to generate controlled gas formation in the battery. When the gas is formed, the battery acid is mixed, which gives the battery back energy.

STEP 7 FLOAT
The battery voltage is kept at its maximum value by charging it with constant voltage.

STEP 8 PULSE
The battery capacity is maintained at 95-100%. The charger monitors the battery voltage and gives a charging pulse as soon as necessary to keep the battery fully charged.